PanoBot 2 : Coolpix Supports

PanoBot2 page		Home
Base & rotation drive	Vertical supports & brace	Shutter motor & release
Coolpix supports	RCX	Light Sensor & encoder
Final Assembly, part1	Final Assembly, part2

Note : both supports are built with the same parts, you can unassemble one to build the other as you swap optical complements...

PanoBot 2 : Coolpix with fisheye (TC- E8) support

Step 01

Piece	Light Gray
Technic Plate 2 x 4 with Holes	2
Plate 2 x 10	2

Step 02

Piece	Black
Technic Brick 1 x 10 with Holes	2
Brick 2 x 4	1

Step 03

Piece	Dark Gray	Black	Light Gray
Brick 2 x 4	-	1	-
Technic Pin 3/4	4	-	-
Technic Brick 1 x 8 with Holes	-	2	-
Plate 1 x 4	-	-	2
Technic Axle Pin	-	-	2

Step 04

Piece	Light Gray
Technic Liftarm 1 x 5	2
Technic Bush 1/2 Smooth	2

PanoBot 2 : Coolpix with wide angle (WC- E24) support

Step 01

Piece	Light Gray
Technic Plate 2 x 4 with Holes	2
Plate 2 x 10	2

Step 02

Piece	Black
Technic Brick 1 x 10 with Holes	2
Brick 2 x 4	1

Step 03

Piece	Dark Gray	Black	Light Gray
Brick 2 x 4	-	1	-
Technic Pin 3/4	4	-	-
Technic Brick 1 x 8 with Holes	-	2	-
Plate 1 x 4	-	-	2
Technic Axle Pin	-	-	2

Step 04

Piece	Light Gray
Technic Liftarm 1 x 5	2
Technic Bush 1/2 Smooth	2

Designed with LeoCAD

PanoBot2 page		Home
Base & rotation drive	Vertical supports & brace	Shutter motor & release
Coolpix supports	RCX	Light Sensor & encoder
Final Assembly, part1	Final Assembly, part2