|
|
|
|
|
|
|
|
|
|
|
|
PanoBot 2 : Final assembly part 2
Sub-assembly |
Shutter release |
Sub-assembly |
Light Sensor |
Piece |
Light Gray |
Plate 2 x 2 Corner |
1 |
Technic Bush |
2 |
Technic Liftarm 1 x 3 |
1 |
Piece |
Light Gray |
Plate 2 x 2 |
2 |
Sub-assembly |
Shutter touch sensor |
Piece |
White |
Black |
Light Gray |
Technic Axle 6 |
- |
1 |
- |
Technic Bush 1/2 Smooth |
- |
- |
1 |
Wheel 81.6x15 - Mindstorm Set |
1 |
- |
- |
Piece |
Light Gray |
Technic Bush 1/2 Smooth |
1 |
Piece |
Black |
Light Gray |
Brick 1 x 2 |
2 |
- |
Technic Gear 40 Tooth |
- |
1 |
Technic Bush 1/2 Smooth |
- |
1 |
Piece |
Light Gray |
Plate 1 x 10 |
1 |
Sub-assembly |
RCX |
RCX Connexion chart |
|
Sensor 1 |
Shutter Touch Sensor |
Sensor 2 |
Rotation Light Detector |
Motor A |
Rotation Motor |
Motor C |
Shutter Motor |
Needed only if you don't mount the PanoBot on a plate:
Piece |
Black |
Technic Pin with Friction |
6 |
Designed with LeoCAD
|
|
|
|
|
|
|
|
|
|
|
|